DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter-Saw

Product Details

Shipping Weight: 64 pounds (View shipping rates and policies)
Shipping: This item is also available for shipping to select countries outside the U.S.
Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
ASIN: B001AIX5OO
Item model number: DW717

By : DEWALT
Price : $459.00
You Save : $513.30 (53%)

Product Description

Amazon.com Product Description
Whether you're cutting baseboards or crown molding, the DEWALT 10-Inch Double-Bevel Sliding Compound Miter Saw provides quick, accurate cuts to complete the job. Thanks to a powerful motor, an easy-to-adjust cam-lock miter handle, convenient miter and bevel stops, plus a tall fence for accomodate oversized moldings, this saw is ready for a range of crosscutting and miter cutting applications.

10-Inch Double-Bevel Sliding Compound Miter SawAt a Glance:

Powerful 15 amp motor delivers no-load speed of 4,000 rpm
Adjustable stainless steel miter detent plate with 11 positive stops
Tall, sliding fence for work with crown and base moldings
Four hardened steel bevel stops on each side for versatility
Two steel horizontal rails for accurate blade travel
Three-year limited warranty and 90-day money-back guarantee

This saw features a 15 amp motor and a no-load speed of 4,000 rpm. .
This double-bevel sliding compound miter saw quickly cuts baseboards and trim..Smart, Powerful Design for Quick, Accurate CutsThe DEWALT double-bevel sliding compound miter saw's 10-inch blade is backed by a powerful and dependable 15 amp motor. Offering a no-load speed of 4,000 rpm, it makes quick work of cutting framing or molding, as well as other crosscutting and miter-cutting jobs.
This sturdy saw is designed to deliver precise cuts, allowing for the versatile setups required for miter applications. The precise miter system's adjustable stainless steel miter detent plate features 11 positive stops for easy setup and improved efficiency. An easy-to-adjust cam-lock miter handle delivers quick and accurate miter angles, and features a convenient detent override, which allows you to adjust the miter setting without the saw slipping into the miter detents. And the saw's big miter capacity--0 to 60 degrees to the left and 0 to 52 degrees to the right--adds versatility.
Tall Fencing and Compact Sliding RailsThe tall fence supports 6-1/4-inch crown molding nested vertically, as well as 6-inch base molding set against the fence. The fence slides out of the way easily when it's time to make bevel cuts. This saw stays compact thanks to its sliding saw dual horizontal steel rails, which feature an innovative clamping mechanism and linear ball bearings for increased accuracy and durability.
Increased Bevel Capacity and Convenient StopsThis saw is designed to deliver quick, accurate bevel cuts. You can easily set up for bevel cuts that measure between 0 and 48 degrees to the left and to the right. This handy setup provides increased capacity for big jobs and allows you to flip the saw instead of the material. Plus, with several bevel stops, it makes finding and setting the bevel angles a quick, easy process.
Ideal for a range of applications, the saw's unique back fence design allows it to deliver clean, 45-degree bevel cuts through dimensional lumber that measures up to 2 by 14 inches.
Portable and Compatible with the DEWALT Laser and L.E.D. SystemThis lightweight sliding compound miter saw weighs just 51 pounds and features a built-in carry handle, so you can move it around the jobsite easily and lift it comfortably when it comes time to stow the saw at the end of the day.
For additional accuracy and ease of use, this saw is compatible with the DEWALT DW7187 (sold separately) adjustable miter saw laser system (sold separately), which ensures that the cutting line is easy to see via a red laser line. An addition option is the DWS7085 (sold separately) which light the work surface and identifies the specific cut line.
This 10-inch double-bevel sliding compound miter saw also comes with a DEWALT warranty package that includes a three-year limited warranty and a 90-day money-back guarantee.
What's in the BoxDW717 DEWALT 10-Inch Double-Bevel Sliding Compound Miter Saw.

The precise miter system's adjustable stainless steel miter detent plate features 11 positive stops and can rotate 90-degrees for a wide range of cuts.

Technical Details

Exclusive bevel detent system, 7 positive stops delivers fast accurate repeatable cuts
Adjustable stainless steel miter detent plate with 11 positive stops
Optimizes cutting accuracy, exclusive cross cut stop positions cutting head for maximum vertical cut capacity
Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings

DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter-Saw

Customer Reviews

Bottom line - with only about three weeks of use (tons of trim work, light framing, and a large deck) this saw is very good at many things, not great at all of them. First, all saws need good blades - period. If yours did not come with one, don't review it till you get one (I replaced the stock 40 tooth blade with an upgraded). Secondly, sliding miter saws inherently add a degree of complication (or versatility depending on how you look at it) to your work, so consider what you really need. If your need is just trim - consider a non-slider. With that said I have always been a fan of 10inch sliders - they are the most versatile tool you can bring to the job site. This model replaces a pretty old Porter and Cable model that I was fairly happy with. Here is my take on the DeWalt. This is a very good saw, essentially a sliding version of the very popular DW703 and DW713 fixed models. The fence is an upgrade over those models, and the features make it a worthy competitor to the class leading Bosch and Makita models.
Here is what I like:
· Build quality - Solid, Limited plastic, Square table and fence, Good slides with no play.
· Adjustments - The wide angles right (60) and left (52) and compound bevel.
· Accuracy - So far (trim work and a deck) cuts are right on, with no slop or wave (I have not cut 12x's yet only 10x's and the saw held a compound angle arrow straight through the cut)
· Vertical capacity - cuts 6" high molding vertically.
· Pre-Sets on the Bevel - Seven different pre-sets for crown both left and right - great time saving feature.
Here is what I am not too keen about:
· The lock for the slide is a small round dial that is still hard for me to find (I would have liked a larger lever a little more prominent)
· Dust collection is not great
· The plates left and right are shorter than I am used to (this is true of the Bosch too) so I have had to adjust how I work a little.
· Set up took longer than I would have liked - Square and 45 were almost there right out of the box, aligning all indicators and making fine adjustments was tough - adjustment screws and indicators move a little when tightening them. Vertical adjustment for perpendicular (the most important) was the toughest.
· The blade provided is just not good enough - especially for the money
· It is a bit more expensive than the Bosch or Makita.
This is a very good saw - it is good at many things, but not great at any one particular item. I compared it mostly to the Makita side-by-side - the motor (higher RPM), vertical capacity, and the length of cut on a 45 were factors that tilted me in favor of DeWalt. The Makita has a bigger table which I like a lot (more like my old Porter ; Cable) but the sliders are low which engineers will tell you promotes more deflection at the head. Most manufacturers now have the slides up higher. DeWalt used to actually stack the slides vertically, but now dual horizontal slides seems like the way to go. The spring that controls the plunge movement on the Makita is just a standard wound spring mounted vertically, this made for a jerk upwards when you let go of the handle and odd feeling back pressure when you pulled down. Also, all these saws need a good table or stand - you can be frustrated using a 10-inch slider with no clamps or a bad set up - make sure any complaints about a saw are not really complaints about a bad work area. Friends swear by their Bosch tools (I have a few and like `em) and the Bosch 10-inch slider is top rated by many, the DeWalt is at least as good, but not much better. So with the DW717, DeWalt only joins Bosch and Makita near the top of this category, not sure it will de-throne anyone - they are all good choices based on work style and preference (I still really like design of the Makita table). The durability of DeWalt, and the features I have mentioned are why I chose the DW717. I admit this review is based on limited use so I will update it after a few more projects.

I replaced my 20-year old Delta Miter Saw with the DeWalt 717. I had planned on purchasing the Bosch 10" slider, but after analyzing and fretting and then testing the new DW717, decided for the money, the DW717 was the best saw for our shop.
Out of the box the saw was setup pretty well, not perfect. It took a whopping five minutes to set up and test the 0 deg, 45L deg, and 45R deg settings. I read the instructions but did not follow them. I think my method was faster and turned out to be highly effective. I loosed the screws that attached the miter scale, then loosened the miter lock and override. I then moved the carriage to set the blade to 90 degrees. I then locked down the miter lock and override, moved the miter scale to line up the indicator to 0 degrees, and tightened the miter scale screws. Made a couple of test cuts in a sheet of MDF (12" wide) to verify that the saw was cutting accurately, and it was. Tested miters at 45L and 45R, and found them to be accurate as well.
The included blade works surprisingly well. I run Forrest and Ridge Tool (In Line Industries) cross-cut blades in my saws, but ordered a Freud LU91M010 blade for the DW717 and will install it soon for our cabinet-making activities. But for construction work and trim carpentry, I would not hesitate to use the standard blade.
The slider action seemed a bit rough but after closer examination of its competitors, there is little or no difference. They all slide a bit rough, even the Makita.
One of the highlights of the DW717 is the fence system. The fences are taller and have greater adjustability and versatility that most if not all previous generation saws. I say previous generation, because the DW717 is one of the newer designs among 10" sliders.
The cutting depth and cross-cut specs are also greater than most 10" saws. A 12" saw provides greater specs in this regard, but I don't like paying $$$$$ for 12" blades, and they tend to flex more in this context.
In regards to head deflection, the DW717 head deflects no more than any of the others when forcing the issue (not cutting, just pushing left or right). However, in use, when done correctly, there is zero deflection.
Though it will not completely cut through a 6 x 6, we tried it and the power seemed to be more than adequate. Since my work is typically cabinetmaker oriented, I generally do not work with construction lumber and thus its specs are perfect for me.
Regarding lack of a laser... I know I can add one at any time for $60 or so. I preferred to have a newer gen saw with the DW717 features than a stock laser that may or may not be effective. Frankly, most slider users with lasers find them less than ideal. So why bother.
On the negative...
1. The DW717, like most sliders, does not include zero clearance inserts. I will find or manufacture them.
2. I hate yellow, but evidently the saw is made in the USA, which is good.
3. Table could be a bit wider, but it offers a better platform that most sliders (Makita is better in this regard).
4. Dust collection leaves a lot to be desired. Until I add a DC drop, I am using a Fein vac with the saw and still at least 50% of the dust ends up on the bench, the saw, and/or my lungs. Okay, I realize this is a common problem, but c'mon manufacturers let's take some time to get this right. +1 for Festool.
5. It's probably just me, but I have yet to figure out the method for doing dados (grooves) at a consistent depth. Sure it's possible, but the depth mechanism is not designed as I would design it...
In Summary....
I had a $50 Home Depot gift card and thus was tempted to purchase the Makita 10" slider which was on sale for $399. Everyone knows the Makita is a great saw, with a great blade, laser, wide table, smooth slider, etc. However, I still purchased the DW717. Why? First of all, quality control at Makita, Hitachi, and Bosch is dropping like lead rocks. Read the reviews, try the saws. Even though I am very picky when it comes to tools, I could make any of them function perfectly well. But, where there is smoke there is fire, and so with an open mind I tried the DW717 and basically fell in love with its features, especially the great fence. It is simple to setup, erognomic to use, and very accurate. Plus, for those who take their saws to the worksite, the DW717 seems lighter or at least better balanced to carry than the competitors. Other than better dust collection and an improved depth mechanism for dados, I am not sure I would change a thing.
Now, where is the spray paint, I hate yellow tools....
Jack Loganbill
http://www.thewoodshop.20m.com